Jeep Wrangler Engine Specs And Options By Trim

Leaving every trim stacked with powerful performance specs, the new Jeep Wrangler engine lineup for 2025 gives Jeep enthusiasts a lot to look forward to. Whether you're looking at the standard 3.6-liter Pentastar V-6 engine that pairs with a six-speed manual transmission, the 2.0-liter Turbo with 295 pound-feet of torque, or the PHEV powertrain that churns out 375 horsepower, your SUV will give you trail-dominating power. Learn more about the different Jeep Wrangler engine options below, then stop by McGee CDJR of Barre for a test drive!

Jeep Wrangler Engine Specs

The varied 2025 Jeep Wrangler engine selection makes it easier to drive away with the power you crave. While you won't see the 6.4-liter HEMI V-8 this year, the remaining three engine options deliver great enough power and performance to make you forget about it. Here's an overview of the new Jeep Wrangler engine choices:

2025 Jeep Wrangler Engine Options

Whichever Wrangler you choose from our new Jeep inventory, it will be equipped with the power and performance you need to conquer any terrain – but which trims come standard with the 3.6-liter V-6? Can you get the 2.0-liter Turbo on the Rubicon X? We'll go over the Jeep Wrangler engine lineup in more detail so you can see which engines can be paired with which trims.

3.6-Liter Pentastar V-6

The 3.6-liter Pentastar V-6 is the base engine for the 2025 Jeep Wrangler. It pairs with a six-speed manual transmission and uses Engine Stop/Start Technology, which automatically shuts off the engine when the vehicle comes to a standstill, helping to improve fuel economy. The V-6 produces 285 horsepower and 260 pound-feet of torque.

2.0-Liter Turbo

Up next is the most rugged Jeep Wrangler engine, the 2.0-liter four-cylinder. This engine and its accompanying automatic transmission come standard on the Saraha trim, although this powertrain is available across the whole gas-powered Wrangler lineup. The 2.0-liter Turbo produces 270 horsepower and 295 pound-feet of torque.

For more information on how Jeep Wrangler towing capacity specs vary by engine, reach out to the team at McGee CDJR of Barre.

PHEV 2.0-Liter I-4 DOHC DI Turbo

The PHEV powertrain brings raw power to the table on the Jeep Wrangler 4xe models, along with impressive fuel economy. It achieves an outstanding 375 horsepower, 470 pound-feet of torque, and 49 MPGe (Combined),⁴ so you can roar down the highway for a long time before you need to refuel.

Find the Best Jeep Wrangler Engine For You at McGee CDJR of Barre!

Whether you're looking for a Jeep Wrangler engine that prioritizes horsepower, versatility, or fuel efficiency, you can get it from our new Jeep inventory. For questions about features, packages, or the difference in each Jeep Wrangler engine size, please don't hesitate to contact us to schedule a walk-through of each trim on the lot. We look forward to showing you what this Jeep SUV is capable of and helping you embark on your next journey!

Frequently Asked Questions

What engines do Jeep Wrangler SUVs have?

Jeep Wrangler SUVs can come with one of three powerful engines that include the 3.6-liter Pentastar V-6, 2.0-liter Turbo, and PHEV 2.0-liter I-4 DOHC DI Turbo that comes equipped on the Jeep Wrangler 4xe models. Each engine varies in power and torque, with the top dog being the PHEV 2.0-liter, which produces 375 horsepower.

How do you reset the Jeep Wrangler engine light?

You can often reset the engine light on your Jeep Wrangler by turning off the vehicle and removing the key from the ignition. Open the hood and disconnect the terminals from the vehicle's battery. Wait about 20 minutes, then reconnect the terminals. However, you should turn to our service staff if you have a real reason to suspect something wrong with your SUV.

What is the most powerful Jeep Wrangler engine?

The most powerful engine in the 2025 lineup is the PHEV 2.0-liter I-4 DOHC DI turbo engine found in the Jeep Wrangler 4xe models. It produces 375 horsepower and a best-in-class 470 best-in-class pound-feet of torque.⁵ If you aren't interested in driving a hybrid vehicle, rest assured that all of the gas Jeep Wrangler powertrains pack a punch, too.

What engine will be in the 2025 Jeep Wrangler?

The standard 2025 Jeep Wrangler engine is the 3.6-liter Pentastar V-6, which comes with Engine Stop/Start Technology and a six-speed manual transmission on the Sport, Sport S, Willys, Rubicon, and Rubicon X trims. Drivers can also opt for the available 2.0-liter Turbo engine (which comes standard on the Wrangler Sahara) on all trims except the Wrangler 4xe models.

How much horsepower does a 2.0-liter four-cylinder turbo Jeep engine have?

The 2.0-liter Turbo engine provides a maximum horsepower of 270 and pairs with an eight-speed automatic transmission. It also offers up to 295 pound-feet of torque, which outpaces the Pentastar V-6 engine's 260 pound-feet of torque. This engine is available in all configurations except the Wrangler 4xe, but it comes standard in the Sahara trim.

Continue Your Jeep Research

¹When properly equipped. See dealer for details.

²EPA-estimated 19 combined MPG with 3.6-liter V-6 and six-speed manual transmission. Actual mileage may vary.

³EPA-estimated 21 combined MPG with 2.0-liter V-6 and eight-speed automatic transmission. Actual mileage may vary.

⁴Manufacturer's miles per gallon of gasoline-equivalent. Actual results may vary.

⁵Class based on Ward's Small Sport/Utility vehicle segmentation. Based on the latest available current competitive information.